Loading...

Flow Measurement Trainer Mechanic

Engineering Equipments / Mechanics / Measurement & Metrology Laborator

FMT/EV

This wheeled trainer is used to investigate the operation principles of a wide range of flow meters available as accessories.
A pump is used to transport the water in a close circuit where the flow meters can be installed in two measuring positions: vertical or horizontal. A valve is used to adjust the flow rate.
The trainer is equipped with a high precision magnetic induction flow meter for reference measurement and for flow meters calibration, with two two-tube manometers and a differential pressure transmitter for measuring the pressure drop on the flow meters.
A voltage source powers is available for the supply of some optional flow meters.


Training program:

This unit enables to deepen the following issues:
■ Principles of operation and types of flow meters.
■ Calibration of different flow meter.
■ Correct installation and connection of flow meters.
■ Effect of position on measurements.
■ Plot of pressure losses for the flow meters.


Technical specifications:

This unit enables to deepen the following issues:
■ Framework of AISI 304 stainless steel with 4 castors with wheel brake.
■ Tank made of AISI 304 stainless steel, capacity 60 l.
■ Pump made of AISI 304 stainless steel, 300 l/min @ 10 m.
■ Power supply 24Vdc, with connecting terminals.
■ Magnetic induction flow, range 0 – 80 l/min.
■ Differential pressure transmitter made of AISI 316 stainless steel, range 0-2 bar.
■ Two two-tube manometers, range 0-1000 mmH 2 O.
■ Switchboard IP55 including ELCB.
Power supply: 230 Vac 50 Hz single-phase - 1500 VA.
Weight: 154 kg.
Dimensions: 1800 x 600 x 1900 mm.


Required

■ Tap water.


Supply with:

■ THEORETICAL – EXPERIMENTAL HANDBOOK.


Additional information:

■ Mod. FMT1/EV Rotameter.
■ Mod. FMT2/EV Rotameter with Transducer.
■ Mod. FMT3/EV Electromagnetic Flow Meter.
■ Mod. FMT4/EV Ultrasonic Flow Meter.
■ Mod. FMT5/EV Venturi Nozzle.
■ Mod. FMT6/EV Pitot Tube.
■ Mod. FMT7/EV Orifice Plate Flow Meter.
■ Mod. FMT8/EV Measuring Nozzle.
■ Mod. FMT9/EV Paddle Wheel Flow Meter.
■ Mod. FMT10/EV Vortex Flow Meter.
■ Mod. FMT11/EV Orifice Plate Flow Meter with Transducer.
■ Mod. FMT12/EV Turbine Wheel Flow Meter.
■ Mod. FMT13/EV Bypass Flow Meter.
■ Mod. FMT14/EV Baffle Plate Flow Meter.

Challenge

Ultricies massa iaculis vestibulum egestas vestibulum, cursus. Leo non arcu ultricies senectus a purus sed.

Solution

Sit tellus id proin viverra iaculis pellentesque ornare. Diam augue sit feugiat porttitor leo, fusce vel ac. Placerat vulputate quisque.


Share this post:

Explore More Categories

We welcome your questions, do not hesitate to contact us

  • Create virtual reality and augmented reality experiences at the best prices
  • Equipping engineering laboratories with the best equipment
  • Virtual tours with 360° technology and also feature that you can see them through just one link
Let's Start To Talk
  • Create virtual reality and augmented reality experiences at the best prices
  • Equipping engineering laboratories with the best equipment
  • Virtual tours with 360° technology and also feature that you can see
    them through just one link
Top