Skip to content

Laboratory & Life Science Equipment

Evaporation & Vacuum Equipment

Equipment for removing solvents and concentrating extracts gently under reduced pressure, from single flasks to pilot-scale volumes.

Request a Quote
Evaporation & Vacuum Equipment

Concentrating extracts without damaging them

Evaporation and vacuum equipment removes solvents from extracts at low temperature so that heat-sensitive compounds are preserved. Rotary evaporators spin a flask in a heated bath under vacuum, with models from compact 2 L units to floor-standing 10–50 L systems and a five-flask multi-sample version. Nitrogen evaporators dry many small samples in parallel before chromatography. Cooling circulators supply chilled liquid to condensers, and water circulation, PTFE diaphragm pumps and vacuum controllers provide stable, adjustable vacuum. Residue, natural products, essential oil, pharmaceutical and university laboratories use this equipment. ASFAN supplies, installs and supports it and helps specify complete extraction laboratories.

ASFAN supplies and supports rotary evaporators and vacuum equipment for research and testing laboratories across the UAE.

Evaporation & Vacuum Equipment

Vertical Multi-Tap Water Circulation Vacuum Pump

Vertical Multi-Tap Water Circulation Vacuum Pump

Floor-standing water circulation vacuum pump with five suction taps that can be used individually or in parallel, with stainless steel pump body and spindle.

  • Power370 W
  • Voltage220 V / 50 Hz
  • Max vacuum0.098 MPa
  • Extraction per tap10 L/min
Features & full specifications

Key features

  • 5 suction taps usable individually or in parallel, with vacuum gauge
  • Stainless steel pump body and spindle
  • Exhaust speed up to 14 L/min
  • Corrosion resistant, pollution-free, low noise, on casters
  • Absorbs harmful gases
  • Water- and energy-saving
  • Optional vacuum regulating valve

Technical specifications

Power370 W
Voltage220 V / 50 Hz
Max vacuum0.098 MPa
Extraction per tap10 L/min
Flow rate≥80 L/min
Lift≥12 m
Taps5
Water tank≥50 L, PVC
Safety protectionCheck valve
Size450×350×820 mm
Request a quote
Benchtop Water Circulation Vacuum Pump

Benchtop Water Circulation Vacuum Pump

Compact, lightweight benchtop water circulation vacuum pump with two suction taps and gauges; available with different shell options.

  • Power180 W
  • Voltage220 V / 50 Hz
  • Flow rate60 L/min
  • Lift8 m
Features & full specifications

Key features

  • 2 suction taps with 2 vacuum gauges, usable individually or in parallel
  • Pump head of stainless steel or anti-corrosive material
  • Corrosion resistant, pollution-free, low noise, easy to move
  • Optional vacuum regulating valve

Technical specifications

Power180 W
Voltage220 V / 50 Hz
Flow rate60 L/min
Lift8 m
ShellAnti-corrosion plastic
Max vacuum0.098 MPa
Extraction per tap10 L/min
Water tank15 L
Size (L×W×H)400×280×420 mm
Net weight10.5 kg
Request a quote
Touch-Screen Rotary Evaporator with Built-in Vacuum Control

Touch-Screen Rotary Evaporator with Built-in Vacuum Control

Rotary evaporator with a large color touch screen, stored programs, built-in vacuum control and automatic lifting with safety stop.

  • Bath volume3 L
  • Temperature rangeRT – 210 °C (±1 °C, PID)
  • Rotation speed20 – 310 rpm
  • Lift150 mm
Features & full specifications

Key features

  • Color touch screen showing several parameters
  • Stored experiment programs, one-button start
  • PTFE-coated heating bath, RT to 210 °C
  • Unattended mode with automatic standby after the run
  • Built-in vacuum control system
  • Automatic lifting with safety stop and timing
  • RS485/USB and infrared interfaces
  • Vertical condenser with drip-point design; forward/reverse rotation
  • Anti-dry protection with over-temperature alarm
  • PTFE sealing; compact design

Technical specifications

Bath volume3 L
Temperature rangeRT – 210 °C (±1 °C, PID)
Rotation speed20 – 310 rpm
Lift150 mm
CondenserVertical, 1800 cm²
Heating power1300 W
Total power1400 W
VoltageAC 220 V / 110 V, 50/60 Hz
Size (L×W×H)600×330×720 mm
Weight16 kg
Request a quote
Rotary Evaporator, 2–5 L

Rotary Evaporator, 2–5 L

Rotary evaporator series with stainless steel and aluminium alloy frame, PTFE/fluororubber sealing and a water bath from room temperature to 99 °C, offered in four lifting/flask configurations.

  • Flask volume0.25–2 L up to 0.25–5 L
  • Rotation speed0–150 rpm (manual 2 L) / 0–130 rpm
  • Bath temperatureRT – 99 °C ±1 °C
  • Evaporation rateup to 0.38 L/min (water)
Features & full specifications

Key features

  • Main metal parts of stainless steel and rust-proof aluminium alloy
  • Compact structure
  • PTFE and fluororubber sealing with glass spindle
  • Water bath RT – 99 °C
  • Over-temperature heater cut-off
  • Valve-type feed pipe with PTFE tube

Available configurations

  • 2 L, manual sliding lift, PTFE bath, cold-trap condenser
  • 2 L, rotary lift, stainless steel bath, digital display
  • 3 L, strut-press lift, stainless steel bath
  • 5 L, button-press lift, PTFE bath, vacuum gauge and valves, 2 kW

Technical specifications

Flask volume0.25–2 L up to 0.25–5 L
Rotation speed0–150 rpm (manual 2 L) / 0–130 rpm
Bath temperatureRT – 99 °C ±1 °C
Evaporation rateup to 0.38 L/min (water)
Lift150 mm
Bath sizeΦ22×11.5 cm to Φ29×17 cm
Heater power1 kW or 2 kW
Condenser area0.15 – 0.31 m²
Ambient temperature5–40 °C
InputAC 220 V / 50 Hz
Request a quote
Compact 2 L Rotary Evaporator

Compact 2 L Rotary Evaporator

Compact 2 L rotary evaporator with coil condenser, manual plus automatic lifting and an integrated control panel for steady rotation and precise temperature control.

  • Flask volume0.25–2 L
  • Rotation speed0–150 rpm
  • Bath temperatureRT – 99 °C ±1 °C
  • Bath sizeΦ22×11.5 cm
Features & full specifications

Key features

  • Coil condenser, quick to assemble and condense
  • Manual lifting combined with automatic lifting
  • Stepless speed control with digital temperature display
  • Integral PTFE heating bath, anti-corrosive and fast heating
  • Water bath RT – 99 °C
  • Protection cap: heat retaining, energy saving, anti-spill and anti-boil

Available configurations

  • 2 L, three body styles sharing the same specification

Technical specifications

Flask volume0.25–2 L
Rotation speed0–150 rpm
Bath temperatureRT – 99 °C ±1 °C
Bath sizeΦ22×11.5 cm
Heater power1 kW
Ambient temperature5–40 °C
Standard flasks250 ml rotating, 500 ml receiving
InputAC 220 V / 50 Hz
Request a quote
Rotary Evaporator with Automatic Lifting, 2–5 L

Rotary Evaporator with Automatic Lifting, 2–5 L

Rotary evaporator series with microcomputer PID bath control, automatic balanced lifting and anti-dry protection, in 2, 3 and 5 L versions.

  • Flask volume0.25–2 L / 0.25–3 L / 0.25–5 L
  • Rotation speed0–310 rpm (2–3 L); 0–200 rpm (5 L)
  • Evaporation rate25 / 27 / 43 ml/min (water)
  • Bath temperatureRT – 99 °C ±0.5 °C (PID)
Features & full specifications

Key features

  • Coil condenser, easy to assemble
  • Manual plus automatic lifting (button or color LCD)
  • Stepless speed control with digital temperature display
  • PTFE/fluororubber sealing with glass spindle
  • Integral PTFE heating bath with safe handle
  • Forward/reverse intermittent rotation for drying powders
  • Anti-dry protection and timed stop (0–999 min)
  • Protection cap for water-bath use; optional vacuum controller

Available configurations

  • 2 L flask
  • 3 L flask
  • 5 L flask, color LCD

Technical specifications

Flask volume0.25–2 L / 0.25–3 L / 0.25–5 L
Rotation speed0–310 rpm (2–3 L); 0–200 rpm (5 L)
Evaporation rate25 / 27 / 43 ml/min (water)
Bath temperatureRT – 99 °C ±0.5 °C (PID)
Bath sizeφ23×13 cm / φ26×15 cm / φ29×17 cm
Lift150 mm with 60 mm safety distance
Heater power1.5 kW
Condenser area0.18 / 0.21 / 0.31 m²
Ambient temperature5–40 °C
InputAC 220 V / 50 Hz
Request a quote
Rotary Evaporator with LCD and Touch/Button Lifting, 2–5 L

Rotary Evaporator with LCD and Touch/Button Lifting, 2–5 L

Rotary evaporator series with large LCD menu interface, unattended mode with automatic standby and touch or button automatic lifting, in 2, 3 and 5 L versions.

  • Flask volume0.25–2 L / 0.25–3 L / 0.25–5 L
  • Rotation speed0–310 rpm (2–3 L); 0–200 rpm (5 L)
  • Evaporation rate25 / 27 / 43 ml/min (water)
  • Bath temperatureRT – 99 °C ±0.5 °C (PID)
Features & full specifications

Key features

  • Large LCD with menu interface; rotary switch
  • PTFE-coated heating bath
  • Unattended mode with automatic standby
  • Bottle-pulling switch for easy flask removal
  • Touch-screen and button automatic lifting
  • 70 W DC rotating motor with soft start
  • Vertical condenser with drip point prevents backflow
  • Forward/reverse rotation with timer for drying
  • Optional vacuum controller
  • Protection cap: energy saving, anti-spill and anti-boil

Available configurations

  • 2 L flask
  • 3 L flask
  • 5 L flask

Technical specifications

Flask volume0.25–2 L / 0.25–3 L / 0.25–5 L
Rotation speed0–310 rpm (2–3 L); 0–200 rpm (5 L)
Evaporation rate25 / 27 / 43 ml/min (water)
Bath temperatureRT – 99 °C ±0.5 °C (PID)
Bath sizeφ23×13 cm / φ26×15 cm / φ29×17 cm
Lift150 mm with 60 mm safety distance
Heater power1.5 kW
Condenser area0.18 / 0.21 / 0.31 m²
Ambient temperature5–40 °C
InputAC 220 V / 50 Hz
Request a quote
Large Floor-Standing Rotary Evaporator, 10–50 L

Large Floor-Standing Rotary Evaporator, 10–50 L

Floor-type rotary evaporator with a large rotating flask for drying, concentration and recovery in pharmaceutical, chemical, academic and research laboratories.

  • Flask volume5–10 L / 5–20 L / 10–50 L
  • Rotation speed10–130 rpm (10, 20 L); 10–110 rpm (50 L)
  • Evaporation rate3.5 / 5 / 9 L/min (water)
  • Bath temperatureRT – 99 °C ±1 °C (PID)
Features & full specifications

Key features

  • Large LCD with menu interface
  • Unattended mode with automatic lifting and standby (not on 50 L)
  • Shelf for vacuum controller and diaphragm pump; lockable casters
  • PTFE sealing; pressure valves for continuous feed/discharge
  • Over-current, overload, dry-heating and fault protection
  • Forward/reverse rotation with timer (0–60 s)
  • PTFE-coated bath; vertical 3-layer coil condenser
  • Automatic lifting with safety distance

Available configurations

  • 10 L flask, 3.5 kW bath
  • 20 L flask, 5 kW bath
  • 50 L flask, 6 kW bath, automatic and manual lifting

Technical specifications

Flask volume5–10 L / 5–20 L / 10–50 L
Rotation speed10–130 rpm (10, 20 L); 10–110 rpm (50 L)
Evaporation rate3.5 / 5 / 9 L/min (water)
Bath temperatureRT – 99 °C ±1 °C (PID)
Bath sizeΦ35×22 cm / Φ45×26 cm / Φ55×32 cm
Lift150 / 190 / 180 mm
Heater power3.5 / 5 / 6 kW
Total power3.8 / 5.3 / 6.3 kW
Condenser area0.18 / 0.21 / 0.31 m²
InputAC 220 V / 50 Hz
Request a quote
Multi-Sample Rotary Evaporator (5 Flasks)

Multi-Sample Rotary Evaporator (5 Flasks)

Rotary evaporator that concentrates 5 samples at the same time, offered with 5×50 ml, 5×100 ml or 5×150 ml flask sets.

  • Sample flasks5×50 ml / 5×100 ml / 5×150 ml
  • Main flask volume0.25–2 L / 0.25–3 L / 0.25–5 L
  • Rotation speed0–310 rpm (2–3 L); 0–200 rpm (5 L)
  • Evaporation rate25 / 27 / 43 ml/min (water)
Features & full specifications

Key features

  • Concentrates 5 samples simultaneously
  • Large LCD with menu interface
  • PTFE-coated heating bath up to 99 °C
  • Bottle-pulling switch; PTFE sealing
  • Touch-screen and button automatic lifting
  • 70 W DC rotating motor
  • Vertical condenser with drip point
  • Forward/reverse rotation up to 310 rpm
  • Vacuum gauge and valve protect the pump from backflow
  • Protection cap: energy saving, anti-spill and anti-boil

Available configurations

  • 5×50 ml, 2 L
  • 5×100 ml, 3 L
  • 5×150 ml, 5 L

Technical specifications

Sample flasks5×50 ml / 5×100 ml / 5×150 ml
Main flask volume0.25–2 L / 0.25–3 L / 0.25–5 L
Rotation speed0–310 rpm (2–3 L); 0–200 rpm (5 L)
Evaporation rate25 / 27 / 43 ml/min (water)
Bath temperatureRT – 99 °C ±0.5 °C
Bath sizeφ23×13 cm / φ26×15 cm / φ29×17 cm
Heater power1.5 kW
Condenser area0.18 / 0.21 / 0.31 m²
Ambient temperature5–40 °C
InputAC 220 V / 50 Hz
Request a quote
Rotary Evaporator with Oil/Water Bath, 2–5 L

Rotary Evaporator with Oil/Water Bath, 2–5 L

Rotary evaporator series whose medium-size oil and water bath reaches 210 °C for flash distillation, with LCD menu, touch/button lifting and anti-dry protection.

  • Flask volume0.25–2 L / 0.25–3 L / 0.25–5 L
  • Rotation speed0–310 rpm (2–3 L); 0–200 rpm (5 L)
  • Evaporation rate25 / 27 / 43 ml/min (water)
  • Water bathRT – 99 °C ±0.5 °C
Features & full specifications

Key features

  • Large LCD with menu interface
  • PTFE-coated heating bath
  • Unattended mode with automatic standby
  • Touch-screen and button automatic lifting
  • 70 W DC rotating motor
  • Vertical condenser with drip point
  • Forward/reverse rotation with timer
  • Oil or water bath, RT – 210 °C

Available configurations

  • 2 L flask
  • 3 L flask
  • 5 L flask

Technical specifications

Flask volume0.25–2 L / 0.25–3 L / 0.25–5 L
Rotation speed0–310 rpm (2–3 L); 0–200 rpm (5 L)
Evaporation rate25 / 27 / 43 ml/min (water)
Water bathRT – 99 °C ±0.5 °C
Oil bathRT – 210 °C ±2 °C
Bath sizeφ23×13 cm / φ26×15 cm / φ29×17 cm
Heater power1.5 kW
Condenser area0.18 / 0.21 / 0.31 m²
Ambient temperature5–40 °C
InputAC 220 V / 50 Hz
Request a quote
Low-Temperature Cooling Circulator

Low-Temperature Cooling Circulator

Mechanically refrigerated low-temperature liquid circulator that supplies chilled liquid or a cold bath for rotary evaporators, freeze dryers, vacuum pumps and magnetic stirrers, and cooling water for larger instruments.

  • Working temperature-10 / -15 / -20 °C to room temperature
  • Temperature precision0.1 K
  • Temperature stability±0.5 K
  • SensorPt100
Features & full specifications

Key features

  • Fully enclosed compressor and water circulation pump
  • Quality imported refrigeration components
  • Digital temperature display with microcomputer control
  • Corrosion-resistant circulation system
  • Protects connected equipment against water shortage or poor water quality
  • Lowest temperature, cooling capacity and tank volume customizable

Available configurations

  • 3 L tank, -15 °C, 510–1000 W cooling
  • 5 L tank, -10 °C, 280–1100 W cooling
  • 5 L tank, -20 °C, 550–1240 W cooling

Technical specifications

Working temperature-10 / -15 / -20 °C to room temperature
Temperature precision0.1 K
Temperature stability±0.5 K
SensorPt100
RefrigerantR404A / ethyl alcohol
Cooling capacity280–1240 W
Max flow rate20 L/min (0 bar)
Tank volume3–5 L
Size (L×W×H)420×225×429 mm to 400×320×650 mm
Input power530–630 W, 220 V 50/60 Hz
Request a quote
Intelligent Vacuum Controller and Vacuum Pump System

Intelligent Vacuum Controller and Vacuum Pump System

Intelligent vacuum control system with a 5.5-inch color touch screen for precise vacuum control of rotary evaporators, offered as a standalone controller, a controller with diaphragm pump, or a complete system with solvent recovery.

  • Vacuum adjust range0–760 mmHg (0–1013 hPa)
  • Vacuum detect range1–800 mmHg (1–1066 hPa)
  • Max vacuum6 mbar
  • VoltageAC 220 V, 50 Hz
Features & full specifications

Key features

  • 5.5-inch color LCD touch screen showing and setting vacuum degree
  • Connects to vacuum pump and rotary evaporator for precise control
  • 5-stage gradient distillation programs (time and vacuum)
  • English/Chinese menu; switchable units
  • Graphic display of vacuum change
  • USB data output
  • Solvent-recovery version condenses and recycles waste vapor

Available configurations

  • Vacuum controller only
  • Vacuum pump with controller (PTFE diaphragm pump)
  • Vacuum pump with controller and solvent recovery (coil condenser, 500 ml receiving flask, waste absorption)

Technical specifications

Vacuum adjust range0–760 mmHg (0–1013 hPa)
Vacuum detect range1–800 mmHg (1–1066 hPa)
Max vacuum6 mbar
VoltageAC 220 V, 50 Hz
ApplicationStrong acid / alkali-containing gas
Diaphragm materialPTFE
Max extraction20 L/min
Pump power130 W
ProtectionIP20
Noise55 dB
Request a quote
Anti-Corrosion PTFE Diaphragm Vacuum Pump

Anti-Corrosion PTFE Diaphragm Vacuum Pump

Oil-free positive-displacement diaphragm vacuum pump with a PTFE compound diaphragm for strong chemical resistance.

  • Max flow rate20 L/min
  • Max vacuum8 mbar
  • Max pressure1 bar
  • Pump typeDouble-stage
Features & full specifications

Key features

  • PTFE compound diaphragm with strong anti-corrosion capability
  • Fatigue-resistant, long service life, no oil mist
  • Better sealing and durability than rubber diaphragms
  • Pollution- and maintenance-free
  • Low noise and vibration
  • Over-temperature protection

Technical specifications

Max flow rate20 L/min
Max vacuum8 mbar
Max pressure1 bar
Pump typeDouble-stage
Power130 W
Voltage110 V / 220 V, 50 Hz
Pump head / diaphragmPTFE
ValvesFFPM
Noise<70 dB
Interface diameter10 mm
Request a quote
Water Bath Nitrogen Evaporator

Water Bath Nitrogen Evaporator

Water-bath nitrogen blowing concentrator that blows nitrogen onto heated samples for fast, oxygen-free concentration, used in food safety, medicine, pesticide residue detection and clinical pharmacokinetics.

  • Samples12 independently controlled
  • HeatingWater bath, RT-100 °C, ±1 °C
  • Tube size10-55 mm (second version 10-29 mm)
  • Tray lift0-150 mm
Features & full specifications

Key features

  • Suits test tubes, conical bottles and centrifuge tubes
  • Spring tube clamps with numbered positions
  • Each needle valve tube adjustable in height and gas flow independently
  • Rotating round rack for easy loading
  • Digital PID temperature controller with timer, overtemperature alarm and dry-burn protection

Available configurations

  • 12-position, for 10-55 mm tubes
  • 24-position, for 10-29 mm tubes

Technical specifications

Samples12 independently controlled
HeatingWater bath, RT-100 °C, ±1 °C
Tube size10-55 mm (second version 10-29 mm)
Tray lift0-150 mm
Tray rotation360°
Timer0-99 h 59 min
Gas flow0-15 L/min
Nitrogen consumption330 mL/min per sample
Power1000 W
Request a quote

Residue analysis preparation

Concentrating solvent extracts of food, soil and water samples brings pesticide residues and contaminants into the detection range of chromatographs and spectrometers.

Plant extracts and essential oils

Gentle evaporation under vacuum recovers active compounds and aromatic fractions from medicinal and aromatic plants without the thermal damage caused by open heating.

Solvent recovery

Condensed solvent is collected in a receiving flask for reuse or proper disposal, lowering consumable costs and reducing emissions in the laboratory.

Higher sample throughput

Multi-sample rotary evaporators and nitrogen evaporators process several extracts at once, shortening preparation time in busy residue and quality-control laboratories.

Frequently Asked Questions

What size of rotary evaporator should we choose?

Choose by the largest volume you evaporate in one run. Compact 2 L and standard 2–5 L units suit most analytical laboratories, while 10–50 L floor-standing systems suit extraction scale-up and pilot work.

Why use a vacuum controller?

A controller holds vacuum at the boiling point of the chosen solvent, which prevents bumping and foaming, improves solvent recovery and lets the same method be repeated reliably from one run to the next.

Which vacuum pump suits corrosive solvents?

A PTFE diaphragm pump resists corrosive vapours and runs oil-free. Water circulation pumps are economical for general work, but their water should be changed regularly when used with organic solvents.

Configure your evaporation set-up

Tell us your solvents, sample volumes and daily throughput. ASFAN will recommend a matched evaporator, pump and chiller and prepare a quotation.

Request a Quote
Chat with us on WhatsApp